Microprocessor controller, format 48x48 (1/16 DIN) manufactured using SMT.

Provides a complete operator interface protected by a Lexan membrane that ensures level IP65 faceplate protection.
The 600 Controller has 4 keys, two green LED displays, each with 4 digits, 4 red signal LED’s for the 4 logic or relay outputs, and 3 other programmable LED’s to signal the various operational states of the instrument.

The integrated Controller and Operator Panel allows the complete management of automation. Available in 3 versions (6 models) and equipped with a powerful 400 MHz processor, these are made to operate in an industrial environment on the control panels of production process machines or processes. The operator interacts through a color touch screen but depending on the model, the size of the screen is 3.5” or 7” wide. The device has options in which can be equipped with programmable function buttons. Thanks to its numerous communication ports (some of which are optional), it is possible to connect a wide range of devices to the controller, such as computers, barcode readers, USB sticks, modems, printers, etc., and connect it to an Ethernet network. The remote input and output modules (CAN-IO/GILOGIK II) are connected by bus to the CAN port (CANopen). Other CANopen standard compliant devices can also be connected to the bus.

SBM Series Brushless servomotors

Requiring a precise and rapid mechanical transmission, these motors are designed to provide the highest level of achievability in acceleration and deceleration characteristics, allowing the highest level of dynamic performance productivity and controllability. The SBM motors are available in six frame sizes a wide continuous stall torque range (from 2 to 442 Nm) and speeds up to 4000 rpm.

Gefran DIGISTAR II

Main applications:

• Used for supervision of industrial processes
• Is a gateway between field and mainframe
• Application in critical environments
• Control of machines and systems
• Data centralization
• Human-machine interface (HMI)
• Data display

Gefran SB Low profile shear load cell

The principle of measurement of the SB load cell series is the deformation caused by the shear generated by the applied load. They are compact load cells with an all stainless-steel construction that are extremely rigid towards the measured load and lateral or transverse loads.

TU Load cell

These TU of load cells are designed for the measurement of static or dynamic loads in compression or traction. All of them are calibrated as load cells in units of mass (Kg). The TU series is supplied for nominal loads from 50 Kg to 1 T. This has an IP67 protection degree so it can be used in aggressive atmospheres often found in the chemical industries. The transducer body is machined from a single piece of stainless steel with no welding. This means that it is highly resistant to mechanical shock and vibration. The compact size means that these can be placed in positions that are difficult to acess and where little space is available.

Gefran GD -Single phase Solid State Relay with logic control and diagnostics

The GD series of solid state relays (zero crossing type) are solid state actuators with heater break diagnostics (Hb function), selectable current scale, and adjustable setpoint. Junction overheat protection is also an available option. An alarm signal is provided in output as well. The GD series of solid state realays are offered with currents of 40A, rated voltage 480 Vac, and Vdc input control signal. Voltage transistors are protected by MOV (varistor).

Gefran Model 400-401 Single Display Controller

These Gefran product are microprocessor controller, manufactured using SMT with a 48x48 (1/16 DIN) format.
It has a complete operator interface, protected by a Lexan® membrane that ensures a face plate protection level IP65.
It have 4 keys, 4 digits display, 2 indicating LED's for 400 model, and the 401 model has 3 indicating LED's and a further 3 LED's bar-graph.

Solutions for hoisting machines from Gefran

Aerial platforms, hydraulic hooklift hoists for containers, forklift trucks, stationary or mobile cranes are machines that hoist goods and people and are subject to changeable weather and heavy working conditions for many hours in a row.

Elevator Positioning Control (EPC) using Gefran ADL300 series Inverters

Elevator company’s needs are best satisfied with a custom solution based on an inverter in the ADL300 family with EPC (Elevator Positioning Control) software to
control the car position.